The good news is, if you’ve already replaced the bulbs, then adjusting the beams should be a piece of cake! To adjust the headlights on a 2003 Dodge Durango
: Start by parking your Durango on a level surface, about fifteen to twenty feet across from a wall. Make sure the knob on your dash for your headlights is set to zero.
Turn on your headlights, and mark where each one hits the wall with an “X” (you can use painter’s tape, for example, to mark the wall). Once you’ve got your markers in place, you can turn your car off and get under the hood. Then:
Locate your car’s headlight assembly
On the top and side of your car’s headlight assembly, you’ll find two adjustment screws
The adjustment screw on top adjusts the vertical direction of your beams; the adjustment screw on the side adjusts the horizontal direction
Use a standard screwdriver to adjust each screw accordingly (it may be easier to do this one at a time, using a cloth or rag to cover the opposite headlight)
Use your markers to adjust your beams to the desired position. And that’s it! Close the hood, test your headlights, and you’re good to drive.
Owning a car can take a lot of work. With Jerry
, finding cheap car insurance
doesn’t have to! As a licensed insurance broker, Jerry can generate you dozens of affordable quotes in seconds from top name-brand providers. We can help switch your policy for you, and even cancel your old one!