Your Chrysler 200’s battery type and size will depend, primarily, on the type of engine it is equipped with. Different batteries have different cold cranking amps (CCA).

The Chrysler 200 was produced for model years 2011 through 2017. Over the years, it featured a variety of engines. But no matter how powerful, the engine doesn’t work alone—a battery is essential for starting your vehicle and running certain electrical components when the engine is off.

Jerry

, the

car insurance

expert and trusted comparison tool, is here to help you better understand how big the battery is on a Chrysler 200. We’ll discuss battery sizes, tell you how to identify your specific battery type, and even fill you in on how to save on

Chrysler insurance costs

How big is a Chrysler 200 battery?

Not every

Chrysler

is equipped with the same battery. In general, you’ll notice variations in cold cranking amps (CCA) based on your engine type.

Take a look at the different batteries that could be found in a 2015 Chrysler 200:

V6/3.6L engine with 615 CCA: 91-1 battery

V6/3.6L engine with 730 CCA: 48H6 battery

V6/3.6L engine with 850 CCA: H7-AGM battery

L4/2.4L engine with 615 CCA: 91-1 battery

L4/2.4L engine with 800 CCA: 94RH7 battery

L4/2.4L engine with 760 CCA: H6-AGM battery

If you’re not sure exactly which battery is in your Chrysler, there are two easy ways to figure it out. First, you can check the battery section of your owner’s manual. Second, you can pop open your hood and take a look at the label on the battery itself.

Keep in mind that you are able to use batteries of different sizes when replacing your battery, so long as the battery you select is compatible with your vehicle and meets your driving needs. You can check out auto parts supply stores, such as

Advanced Auto Parts

, for a collection of batteries that have enough amperage and reserve capacity for your vehicle.

MORE:Chrysler 200S V6

Chrysler 200 battery life

Batteries in gas-powered vehicles are designed to be charged by… well, the vehicle itself! That’s right—when your Chrysler 200’s battery is functioning correctly, it will be recharged by the engine as you drive.

However, batteries do need to be replaced on occasion—just like any other car part. Many car experts agree you should change your battery every four to five years, though that timeframe depends on several factors that affect battery life, such as how often you drive and what temperature you store your vehicle in.

The best practice is to regularly test your car’s battery so that you do not experience an unexpected failure while far away from home. You can also keep an eye out for these signs your battery is failing:

Clicking sounds when starting your vehicle

Visible corrosion on the battery

A frequently dead battery that requires

jumping and/or charging

Lights that are dimmer than usual

MORE:

How to check and decode a Chrysler VIN

How to keep your Chrysler 200 battery healthy

In addition to regular battery tests, there are several steps you can take to extend the life of your Chrysler’s battery:

Start your engine and drive your car regularly. Your battery is recharged by your engine, so cars that stay parked in the garage for long periods of time aren’t getting any juice! Start your car and drive it around regularly—for at least 15 minutes at a time.

Manually recharge the battery after storing your vehicle. If you do have to store your vehicle for an extended period (for example, a few weeks of vacation), consider removing and manually recharging your battery before starting your car.

Never leave your lights on. When your engine is off, lights and other electrical components drain your battery.

Disconnect electronics when not in use. Unplug all electrical cords as soon as your engine is off so that they do not drain your battery.

Perform essential vehicle maintenance. Other issues with your car’s electrical system can cause battery depletion, so don’t neglect necessary maintenance.

MORE:How to refill a car battery

How to save on Chrysler 200 insurance

From replacement parts to oil changes, owning a vehicle can get expensive! Fortunately,

Jerry

can help you save an average of $800 a year by finding you better-priced

car insurance

in under a minute.

trusted comparison tool

and licensed broker, the Jerry app does all the hard work of scanning quotes from the top name-brand insurance companies and buying new car insurance. Jerry will even help you cancel your old policy.

And to ensure you always have the lowest rate, Jerry will send you new quotes every time your policy comes up for renewal, so you’re always getting the coverage you want at the best price. This level of service is why Jerry earned a 4.7/5 rating on the App Store and became the top insurance app in the country.

“Without a doubt, using

Jerry

was a seamless process! The staff was attentive to my every question. My new Nationwide policy premium saves me $200 a month. Let them save you money too!” —Kenny P.

Estimate your repair costs for free with GarageGuard™

Simplify your car maintenance with Jerry.

Try GarageGuard™