Keeping your tires filled with the recommended tire pressure is one of the most important safe driving practices out there. Tires with too much or too little air in them leave you vulnerable to excessive tire wear, difficulty steering and handling, and even collisions.

Jerry

, the

trustworthy insurance comparison app

, has created this guide on the correct Hyundai Palisade tire pressure to make sure you're driving as safely as possible. We’ll cover where you can find the recommended psi, how you can check your tire pressure yourself, and what to do when your TPMS light needs resetting. We’ll also show you how to save on

Hyundai car insurance costs

What is the right tire pressure for a Hyundai Palisade?

Generally, the Hyundai Palisade tire pressure should be 35 psi for both the front and rear wheels. Confirm the recommended tire pressure listed in your owner’s manual or on the door jamb on the driver’s side, since the exact measurement may change depending on the trim level you drive.

Performance or sport trims, for example, may require different tire pressures for your front wheels and rear wheels. You’ll also want to note your specific type of tire if you’re rolling with any specialty tires. Touring and summer tires often won’t have the same pressure requirements as an all-season set.

Tire pressure recommendations for other Hyundai vehicles

Vehicle	Front tire pressure	Rear tire pressure
Hyundai Sonata	34 psi	34 psi
Hyundai Tucson	35 psi	35 psi
Hyundai Santa Fe	33 psi	33 psi
Hyundai Santa Fe Sport	34 psi	34 psi
Hyundai Accent	33 psi	33 psi
Hyundai Elantra	33 psi	33 psi
Hyundai Veloster	33 psi	33 psi

Compare insurance quotes from 50+ carriers with Jerry in under 45 seconds (Title in payload)

Find Savings!

4.7/5 rating on the App Store | Trusted by 5+ million customers and 7 million cars

4.7/5 app rating | Trusted by 5M+ drivers

MORE:

How low can your tire pressure go?

How to check Hyundai Palisade tire pressure

Checking your Hyundai Palisade tire pressure is happily pretty simple. The Palisade wasn’t introduced until 2018 so each model has relatively advanced technology, including a tire pressure display on the vehicle’s infotainment system. You should be able to see the current tire pressure for each wheel displayed on the digital dash.

If you do not have that feature or would rather check for yourself, you’ll need a tire pressure gauge. You can find this small tool at any auto supply shop if you don’t already have one. Then, remove the air valve stem caps on each tire and push the gauge onto the exposed valve stem. Whatever reading pops up on your gauge is the current tire pressure and will tell you if your wheels need more or less air.

You’ll also likely be able to tell when your tire pressure is off from your Palisade’s driving performance. If you’re finding it more difficult to steer straight or stop suddenly, or you notice your fuel economy taking a dip, you’ll want to check out your tire pressure.

How often should you check tire pressure?

You should confirm your tire pressure monthly, or before you take any long trips or tow heavy loads.

How to tell if your Hyundai Palisade needs new tires

It is typically recommended that you swap out all of your tires once every six years, but your driving environment and how often you drive will affect that interval. Rather than adhering closely to any specific time frame, it will be better to check on your tires every now and then to ensure they’re in good form.

If you notice your tread is overly worn, cracked, bulging, or uneven, it’s time to change your tires.

MORE: Low tire pressure in cold weather, and how to fix it

How to reset the Hyundai Palisade tire pressure monitoring system (TPMS) light

The tire pressure monitoring system (TPMS) in your Hyundai Palisade can be extremely beneficial. It functions in part to alert you to any suspicious or worrying conditions of your tires, but its warning light has a habit of staying on even after you’ve remedied the issue.

If you’re still faced with an alert after you handle the problem, you’ll need to

reset your TPMS

. Most of the time, taking a drive for at least 10 minutes going at or above 50 mph will be enough for the system’s sensors to reset. If that doesn’t work, try these other TPMS resetting options:

Turn the key “on” but leave the vehicle off; press and hold the TPMS reset button until the alert light blinks three times; release the button, start your car, and take a 20-minute drive

Inflate each tire to 3 psi above the recommended tire pressure; deflate each tire completely; re-inflate each tire to the recommended tire pressure

While the vehicle is off, disconnect the positive battery cable; depress the horn button for three to five seconds to discharge remaining power to the vehicle; reconnect the battery

If all else fails, schedule a service appointment at a nearby Hyundai dealership. A Hyundai technician will be able to sort the issue and recalibrate your TPMS.

MORE:

How to retrieve your Hyundai radio code

How to save on Hyundai Palisade insurance

Regular vehicle maintenance, including checking and filling tire pressure as needed, keeps your car in working order and is one of the best ways to save money on your car-related expenses. Another one of the best ways to save money as a car owner? Shopping for your

Hyundai Palisade car insurance

through the nation’s top-rated brokerage app,

Jerry

Jerry is the easiest and most effective way to find a

car insurance

policy that is customized for you.

After providing you with a comprehensive cross-analysis of the best policies and rates across providers, Jerry will handle the phone calls, paperwork, and renewals for your top pick so that you don’t have to. They can even help cancel your old policy! So why do all that extra work when Jerry can do it better?

“
Jerry
was spot on. I’m young with one rear end on my record. Still, they dropped my monthly insurance rate from $468 to $250. This really saved me money.” —Jason M.