2016 Nissan Altima Bolt Pattern
Your bolt pattern is 5x4.5—but we’ll explain how to measure it for yourself, along with the stud size and offset specs for your 2016 Nissan Altima.
Written by Bonnie Stinson
Reviewed by Melanie Reiff
A 2016 Nissan Altima bolt pattern is 5x4.5. In other words, each wheel on your car has five bolts, and these bolts form a circle that is 4.5 inches in diameter.
Upgrading your ride can be as easy as switching out your wheels. But you’ll need to know the correct measurements before you can proceed. From lug pattern to torque specifications, make sure you have the correct specs before you replace your wheels.
In addition to finding a great
car insurance
policy, getting to know your vehicle can help you lower the cost of car ownership over the long run. Here’s a quick guide to your 2016 Nissan Altima bolt pattern.Compare insurance quotes from 50+ carriers with Jerry in under 45 seconds (Title in payload)
4.7/5 rating on the App Store | Trusted by 5+ million customers and 7 million cars4.7/5 app rating | Trusted by 5M+ drivers2016 Nissan Altima bolt pattern
The bolt pattern for a 2016 Nissan Altima is 5x4.5.
Here’s a formula that describes what that bolt pattern actually means:
# of bolts x diameter of the circle they form
The number of bolts on each wheel of your Altima is five, so that’s the first number in your bolt pattern. The next number is the diameter of the circle they form as measured in inches, which is 4.5 on this vehicle.
Your bolt pattern is unique to your vehicle. Occasionally, bolt patterns will change between model years, so don’t assume that your friend’s newer Altima has the same
Nissan lug pattern
as your 2016 Nissan Altima. There are a few more specs you need to know about your Nissan Altima’s wheels before you buy a new set. In addition to the lug pattern, you need to know your wheel size, stud size, center bore, and torque specifications.
There are a few other stats that matter when it comes to your Nissan’s wheels. You’ll need to know your wheel size, stud size, center bore, and torque specifications. Your Altima’s factory wheel size depends on your trim and other configurations, so check your manual carefully to confirm your own measurements. Here are the typical specs:
- Factory wheel size: 16”, 17”, or 18”
- Stud size: M12 x 1.25
- Offset: 35 to 59 mm
- Center bore: 66.1 mm
- Wheel tightening torque: 113 Nm
If you have made any modifications to your Altima since you originally acquired the vehicle, the above stats might be inaccurate. Again, check your vehicle carefully!
How to measure your Nissan Altima’s bolt pattern
You can easily measure your own bolt pattern with a measuring tape or a ruler. Grab your measuring device and head out to your car.
Pick a wheel, and then select any lug hole on that wheel. You’ll start by placing one end of your ruler at the center of this lug hole.
Now, your wheel has five lug holes so there is no hole directly opposite across the hub from the hole you picked. Instead, bring your ruler across the hub to the imaginary spot where a hole would be, then pick one of the lug holes on either side. Place the other end of the ruler at the outer edge of that lug hole.
The measurement between these two spots should be 4.5 inches, which, in combination with the number of bolts per tire (5), gives you the Nissan Altima bolt pattern of 5x4.5.
MORE: How long do Nissans last?
Jerry sends free alerts to keep your car up-to-date so you can avoid costly repairs
* checking your rate won’t affect your credit score
Get ahead of my car maintenance
* checking your rate won’t affect your credit score
FAQ
What is the bolt pattern on a 2016 Nissan Altima?
The bolt pattern on a 2016 Nissan Altima is 5x4.5. Every wheel on your car has five bolts and these bolts form a circle that is 4.5 inches in diameter.
Estimate your repair costs for free with GarageGuard™
Simplify your car maintenance with Jerry.
4.7You might also be interested
