The 2014 Dodge Dart is an affordable option that benefits from changes Chrysler made to its first modern compact car. For it to run well, you need to know its engine oil capacity.

No matter what vehicle you own, it will eventually require maintenance. With a 2014 Dodge Dart, you can reduce some of your maintenance costs by handling oil changes at home. Before you do, however, be sure to check the owner’s manual to see what kind of oil you need—and how much.

If the manual is missing and you need more information on the 2014 Dodge Dart, look no further.

Jerry

, the expert driving app and

car insurance

comparison tool, has everything you need to know to make your Dart oil change a snap!

Before we wrap up, we'll even share how to lower your

Dodge Dart insurance costs

2014 Dodge Dart engine oil capacity

First, you need to determine how much oil your 2014 Dodge Dart holds.

The 2.4-L 4-cylinder engine that runs the 2014 Dodge Dart holds 5.5 quarts or 5.2 liters. Oil capacity is the amount of oil needed for each change. This is different from engine displacement, which, in this case, is the 2.4-liter volume the cylinders take up.

Jerry sends free alerts to keep your car up-to-date so you can avoid costly repairs

* checking your rate won’t affect your credit score

Get ahead of my car maintenance

* checking your rate won’t affect your credit score

What kind of oil does a 2014 Dodge Dart need?

Now that we went over how much oil the Dart requires, it’s time to learn about what type of oil. Not all oil is created the same, so don’t buy the first one you see on the shelf. You want to buy an advanced full synthetic 0W-20 motor oil. This is what Dodge recommends for the 2014 Dart.

But what does that really mean? Let’s talk about it. The numbers in the oil grade refer to the oil’s viscosity—how thick it is—while the “W” stands for winter. The number 0 right before “W” tells us that this oil’s got a low viscosity at 0°F, while the number 20 means that it’s also relatively thin at a blazing hot 212°F.

To put it more simply, you are looking for an oil with these ratings because it performs well in cold weather conditions, but low viscosity means less wear and tear on your engine. “Synthetic oil” means it’s made from artificial materials.

MORE:

Ultimate FRAM oil filter guide

How often to change oil on a 2014 Dodge Dart

Now that you are an expert on the 2014 Dodge Dart oil type and capacity, let’s

change your oil

Keep in mind Dodge recommends changing your oil every 3,500 to 4,500 miles if you’re using conventional oil. If you are a frequent driver, changing every six months might be worth considering to make sure the oil stays clean and functional.

If you have decided on synthetic oil, you can go longer between oil changes. Experts recommend changing synthetic oil every 7,500 to 10,000 miles.

Make sure you change the oil at the right time by checking your car’s oil levels regularly. The following signs will pop up if it needs to be changed:

Strange noises coming from the engine

Smells that smell of oil, smoke, or burning

Changes in your vehicle’s performance

MORE:

Basic car maintenance schedule

How to change your oil and oil filter

Once you know it’s time to change the oil, gather up your materials. You’ll need the following: a drain pan, a filter wrench designed to remove the old oil filter, and a socket wrench. You will also need a replacement filter and 5.5 quarts of advanced full synthetic 0W-20 motor oil.

You want to start by running the engine to bring it up to normal operating temperature. In normal weather, this won’t take longer than five minutes. Once it reaches that temperature, shut off the engine, open the hood, and follow these steps:

Take off the oil cap

Position yourself beneath the engine and take off the washer and drain bolt—this will release the old oil into the pan

While the oil drains, take off the old filter

Put on the new filter

Take off the old drain bolt, put on the new washer, and tighten to 29 lb-ft

Put on the fill cap and fill up the engine

After changing your oil, it’s a good idea to turn on your car and let your engine run for about 30 seconds before you check the oil level. This will give you a more accurate measurement, and you’ll be able to top it off if necessary.

Your dipstick will show if you’ve added enough oil. Once you complete the change, run the vehicle to see if there are any leaks. If you did it correctly, your

oil pressure light

should turn off.

Finally, make sure to clean up. Don’t just dump the old oil on the ground or in a garbage can. Instead, place it in a tightly sealed container and bring it to a local recycling center.

Don’t forget regular insurance policy maintenance

Once you’re done, it’s time to drive! Regular oil changes will keep your 2014 Dodge Dart running smoothly for years. And the best part of doing it at home? You save time and money!

If you want an alternate way to save time and money, download the

Jerry

app. As a

car insurance

expert and

trusted comparison tool

, Jerry will scan rates from over 50 name-brand providers and deliver the best deals straight to you.

Just tap your pick, and Jerry takes care of the rest—securing your new policy and helping to cancel your old insurance. Best of all, Jerry users save an average of over $800 a year on their policies!

“I was looking for a liability insurance plan for my truck until I can afford more coverage.
Jerry
made it simple to shop around for the best deal for me. Thank you!” —Jake L.

RECOMMENDED

Thousands of customers saved on average $887/year on their car insurance with Jerry

This app is great, but the customer service is even better! Not to mention convenient! My husband and I got the lowest rate (much lower than the rates I was finding online through my own searches), quickly, and pretty much all through text message! Thank you so much for a hassle free experience👍

Gabriella R.

Find insurance savings

4.7/5 Rating on App Store

Estimate your repair costs for free with GarageGuard™

Simplify your car maintenance with Jerry.

Try GarageGuard™