2010 Ford Escape 2.5 Engine Oil Capacity
Want to figure out the oil capacity of your Ford Escape 2.5? We’ve got you covered—and we’ll go over some tips and tricks for saving on your car insurance too!
Written by Elaine Yang
Reviewed by Melanie Reiff
With innovative features and a great crash score, the 2010 Ford Escape 2.5 is a great choice for those looking for a great all-around performer. However, you will need to figure out your Ford Escape engine oil capacity to keep it in shape.
Owning a vehicle comes with many benefits and costs, whether it's insurance, repairs, or regular maintenance. If you own a 2010 Ford Escape 2.5, you can save some money by doing an oil change in your garage. But be careful—check your owner’s manual to make sure you’re using the right type of oil for your car.
Luckily,
Jerry
, the super app that helps drivers save money on car insurance
, has compiled a comprehensive guide to oil changes for your 2010 Ford Escape 2.5. Plus, we've added some tips to help you lower your Ford Escape insurance costs
.2010 Ford Escape 2.5 engine oil capacity
The first question you’re going to need to answer is: how much oil does your 2010 Ford Escape 2.5 need?
Your 2010 Ford Escape has a 2.5-liter I4 engine, and it has an oil capacity of 5.3 quarts or 5 liters. Make sure not to confuse your vehicle’s oil capacity with its engine displacement. A car’s engine displacement refers to the space that its cylinders take up, which is 2.5 liters in the 2010 Ford Escape. Oil capacity tells you how much oil you need to replace when doing an oil change.
What kind of oil does a 2010 Ford Escape 2.5 need?
Since you know how much oil you’re going to need to purchase, you also need to know what brand is best for your Ford. Don’t just buy just any bottle you find on your hardware store’s shelves—make sure the oil is compatible with your engine. Look for 5W-20 synthetic motor oil.
You might be curious about what all those numbers and letters mean. The numbers tell us what kind of viscosity the oil has, while the “W” stands for winter. The 5 means that the oil has a low viscosity at 0°F, and 20 means that it stays thin at higher temperatures, like 212°F.
Basically, this oil will allow your vehicle to perform well during the winter when the weather is cold, and its lower viscosity will prevent general wear and tear on the system.
When looking on the shelves, you might notice that you can choose between synthetic and conventional motor oil. While they both do the job, synthetic oil tends to be easier on an engine, so it’s best to stick with that.
If you want to stick with the owner's manual recommendation, look for Motorcraft SAE 5W-20 Premium Synthetic Blend Motor Oil or Motorcraft SAE 5W-20 Full Synthetic Motor Oil.
How often to change oil on a 2010 Ford Escape 2.5
Now that you’re ready for an oil change, you'll need to learn how to do one!
First, you must determine when it’s time to change the oil on your Ford. Mechanics recommend that drivers change their oil every 3,000 to 5,000 miles. Remember that this number will vary if you use fully synthetic oil, as it tends to last longer.
Since that's a large range, you should be proactive and check your oil monthly. Be on the lookout for the following:
- If your oil is a darker color, it might be time for an oil change
- Your oil might feel grittier
- Strange noises from the engine
- Unfamiliar smells (ex. oil, smoke, or burning)
- Performance changes
Are you overpaying for your car insurance?
Are you overpaying for your car insurance?
Compare quotes and find out in 45 seconds
4.717k Ratings5M+Drivers Joined
7M+Cars Garaged
How to change your oil and oil filter
If you’ve determined that your Ford needs an oil change, make sure you have a socket wrench, a drain pan, a new filter, new oil, and a filter wrench.
You’ll need to run your engine for a bit to warm it up. This should take around five minutes, or longer depending on how cold it is. Once your engine is ready, turn the car off, crank open the hood and follow these steps:
- Find the oil fill cap and remove it
- Find and remove the oil drain bolt and washer, which should be under the engine
- Drain out the old oil and remove the old filter
- Install the new filter
- Use a new washer and replace the oil drain bolt
- Refill the engine and replace the cap
After changing your oil, it’s a good idea to turn on your car and let your engine run for about 30 seconds before you check the oil level. This will give you a more accurate measurement, and you’ll be able to top it off if necessary.
Using your dipstick as an indicator, you'll know when you've added enough oil. Next, turn on the engine, and check for leaks. Your dashboard's
oil pressure light
should turn off if you've done the oil change correctly.Finally, make sure not to leave the old oil on the ground—collect it in a container and drop it off at your local recycling center.
Don’t forget regular insurance policy maintenance
And you should be good to go! Doing an oil change at home can save you time and money, something that the
Jerry
app can do for your car insurance
needs. After providing you with a comprehensive cross-analysis of the best policies across providers, Jerry's
trustworthy super app
will handle the phone calls, paperwork, and renewals for your top pick so that you don’t have to. They can even help cancel your old policy. No hard work, just savings! “I just had to buy a new car, and I needed quick help to get insurance before I could get my plates. Because I work so many hours,Jerrywas the ideal choice for getting things done without long phone calls and waiting periods.” —Rosa G.
Compare insurance quotes from 50+ carriers with Jerry in under 45 seconds (Title in payload)
4.7/5 rating on the App Store | Trusted by 5+ million customers and 7 million cars4.7/5 app rating | Trusted by 5M+ driversEstimate your repair costs for free with GarageGuard™
Simplify your car maintenance with Jerry.
4.7
