Ford Expedition Tire Pressure
The proper Ford Expedition tire pressure is 35 or 39 PSI, depending on tire size.
Written by John Davis
Reviewed by Melanie Reiff
The recommended Ford Expedition tire pressure is either 35 or 39 pounds per square inch (PSI) in both the front and rear, depending on the tire size.
Keeping your tires inflated to the proper level is vital not only for your own safety and the protection of your car but also for the safety of other drivers and pedestrians. Improperly inflated tires can cause a variety of problems, including poor fuel efficiency, steering issues, and even a blowout. Each of these issues can come back to bite you and your wallet down the road.
Fortunately, the
car insurance
comparison app, Jerry
, has all the information you need to know about your Ford Expedition tire pressure. In this article, we’ll go over the proper air pressure specs and even drop some tips on how to save on your Ford Expedition insurance cost
. Compare insurance quotes from 50+ carriers with Jerry in under 45 seconds (Title in payload)
4.7/5 rating on the App Store | Trusted by 5+ million customers and 7 million cars4.7/5 app rating | Trusted by 5M+ driversWhat is the right tire pressure for a Ford Expedition?
The correct tire pressure for most Ford Expeditions is 35 PSI front and back. However, depending on your tire size, the proper tire pressure for your Expedition might be 39 PSI for the front and rear tires. You can find your car’s recommended tire pressure by checking the owner’s manual or looking at the sticker on the driver’s side door frame.
While most Ford Expeditions need 35 PSI in all four tires, if you swap out your stock tires for larger or high-performance versions, the recommended tire pressure might change. Always be sure to check the specifications for your new tires before you fill them incorrectly.
Tire pressure recommendations for other Ford vehicles
Vehicle | Front tire pressure | Rear tire pressure |
|---|---|---|
2022 Ford Explorer | 33 PSI | 33 PSI |
2022 Ford F150 | 35-40 PSI | 35-40 PSI |
2022 Ford Mustang | 32-35 PSI | 32-35 PSI |
2022 Ford Escape | 35 PSI | 35 PSI |
2022 Ford Edge | 35-38 PSI | 35-38 PSI |
MORE:How to build a custom Ford Expedition
How to check Ford Expedition tire pressure
Regularly checking your tire pressure is an essential part of vehicle maintenance, but luckily, it’s easy and quick to do. And depending on the age of your Expedition, you might be able to check the tire pressure without ever leaving the driver’s seat.
If you own a newer Ford Expedition, you can check the tire pressure by navigating to the vehicle info menu on the dashboard display and selecting tire pressure. If your tire pressure is already too low, a warning light that looks like an exclamation mark inside a tire tread will illuminate, signaling low tire pressure.
If your Expedition is not equipped with an interactive dashboard display, checking the tire pressure is still easy.
Simply locate the valve stems on your tires. Then, remove the valve cap and push a tire pressure gauge into the valve stem. Doing this will provide you with a pressure reading that you can then use to add or remove air from the tires as needed.
You can check your tire pressure in your driveway, or you can visit your local gas station and use their air compressor, which will have a built-in pressure gauge.
If your air pressure is too low, your car might tell you so. Things like a bumpy ride, steering problems, and decreased performance can all be signs of low tire pressure. If you’re experiencing these issues and aren’t sure whether your tire pressure is low, check it!
How often should you check your tire pressure?
You need to check your tire pressure at least once per month, and every time you take a road trip.
How to tell if your Ford Expedition needs new tires
If you’re an average driver—meaning you drive about 12,000 to 15,000 miles per year—you should have to replace your tires every three years or so. However, even if your tires are brand new, it’s worthwhile to check the condition of your tires each time you check the air pressure. Signs that your tires need to be replaced include bumps or cracks, exposed wires, and low tread depth.
If you aren’t sure how to check the tread of your tires, you can use an inexpensive tread depth gauge from your local auto parts store or use the penny method. To perform the penny method, place a U.S. penny head-first into your tire tread. If you can see Lincoln’s head, your tires need to be replaced.
RECOMMENDED
Compare auto insurance policies
No spam or unwanted phone calls · No long forms
How to reset the Ford Expedition tire pressure monitoring system (TPMS) light
Sometimes, that tire pressure warning light won’t go off, even after you properly adjust the pressure. If this happens to you, you may need to
reset the TPMS
.Unfortunately, you will need a TPMS tool to accomplish this in your Ford Expedition. These are usually quite expensive. However, your local auto parts store probably has one that you can borrow—otherwise, you’ll need to shell out the cash or visit the repair shop.
To reset your Ford Expedition TPMS, park your car and follow these steps:
- Step 1: Press and release the brake pedal once.
- Step 2:Turn the key from OFF to ON three times, ending in the ON position. Do NOT turn on the engine. If your car is equipped with a start button, press the button from OFF to ON three times.
- Step 3: Press and release the brake pedal once more.
- Step 4:Turn the key to the OFF position.
- Step 5:Repeat Step 2. If you do this correctly, you will hear your car’s horn honk and see the TRAIN LEFT FRONT TIRE message appear on the dash screen.
- Step 6:Beginning with the front driver’s side tire, place the TPMS tool against the tire sidewall near the valve stem and press the button to relearn the sensor. The horn will chirp when the sensor is relearned.
- Step 7:Continue clockwise around the car until you hear the last horn chirp for the rear driver’s side tire.
- Step 8:Turn the key to OFF and then adjust the air in each tire to the proper level.
If this process does not work to reset your TPMS, you may need to take your car to a mechanic for further inspection and repair.
MORE:Ford Expedition towing capacity
How to save on Ford Expedition insurance
Any good car-care plan should include regularly checking the tire pressure. But that’s not all you need to do to protect your Ford Expedition. A quality insurance plan is just as essential and is a wonderful way to protect yourself and your vehicle.
Luckily, buying car insurance is even easier than checking your tire pressure, thanks to the
licensed broker
super app, Jerry
. When you download the Jerry app, we’ll do the hard work for you by comparing quotes from the nation’s top providers to find the best plan for you and your situation. All you have to do is answer a few questions and wait for your bank account to thank you. Don’t worry. If you ever need any extra help, Jerry’s licensed and attentive agents are always just a phone call or text away.
“I’ll keep this simple for you. They literally saved me $100 a month.Jerryis an amazing platform.” —Indiana L.
RECOMMENDED
Thousands of customers saved on average $887/year on their car insurance with Jerry
This app is great, but the customer service is even better! Not to mention convenient! My husband and I got the lowest rate (much lower than the rates I was finding online through my own searches), quickly, and pretty much all through text message! Thank you so much for a hassle free experience👍
Gabriella R.
Find insurance savings
4.7/5 Rating on App Store
Estimate your repair costs for free with GarageGuard™
Simplify your car maintenance with Jerry.
4.7You might also be interested
