You can change the oil on your 2019 Jeep Grand Cherokee by removing the oil reservoir cap, pumping out the old oil, and replacing it with new oil. The 2019 Jeep Grand Cherokee’s oil capacity is 8.1 quarts.

Car maintenance can be a pain, and the sight of the oil pressure light is enough to make any driver groan. But changing the oil on your 2019 Jeep Grand Cherokee is pretty easy to do, even for those of us who don’t spend much time in the garage.

That’s where

car insurance

broker

Jerry

comes in. More than just the top-rated insurance app across all platforms, Jerry is here to walk you through what you need to know about your 2019 Grand Cherokee’s engine oil capacity and how to change your oil yourself. Plus, we've got some tips to help lower your

Jeep Grand Cherokee insurance costs

Jerry sends free alerts to keep your car up-to-date so you can avoid costly repairs

* checking your rate won’t affect your credit score

Get ahead of my car maintenance

* checking your rate won’t affect your credit score

2019 Jeep Grand Cherokee engine oil capacity

So, just how much engine oil does a 2019 Jeep Grand Cherokee need? A 2019 Jeep Grand Cherokee has an oil capacity of either 6 or 7 quarts.

With a whopping 270 maximum horsepower, you want to be sure that your 2019 Jeep Grand Cherokee’s powerful engine isn’t grinding itself up without proper lubrication. Buying an engine oil that will best optimize your engine will keep everything running smoothly.

MORE:

How much should an oil change cost?

What kind of oil does a 2019 Jeep Grand Cherokee need?

Every engine is different, and every engine oil is made to optimize certain features in your car.

For a 2019 Jeep Grand Cherokee, the owner’s manual recommends SAE 0W-20 fully synthetic motor oil. It’s good to stick to Jeep’s recommendations when doing DIY maintenance.

The numbers in an oil rating (0W-20) refer to the oil’s viscosity at different temperatures. The goal is for the oil to stay as thin and lubricating as possible in your engine.

The “W” in 0W-20 stands for winter, referring to the oil’s rating in winter temperatures. Since this oil has a winter rating of 0, we know that it will perform very well in the cold, better than, say, a 10W-20 oil would.

The number after the W is the oil’s viscosity in warm temperatures. With a rating of 0W-20, you can be sure that this oil will perform well in both the freezing cold and the blazing heat of your engine.

Since this oil is fully synthetic, it’ll require less frequent oil changes and be better for your high-power 2019 Jeep Grand Cherokee engine.

MORE:

How often to change oil on a 2019 Jeep Grand Cherokee

As a rule of thumb, you should check the oil in your 2019 Jeep Grand Cherokee every 3 years or 3,000-5,000 miles. If you don’t drive often, checking your oil every 6 months is probably a better metric for you, since oil will degrade in your car over time no matter how often you drive.

If you’re using fully synthetic oil, however, you can probably wait a little longer to perform an oil change. Experts recommend changing synthetic oil every 7,500 to 10,000 miles.

But that’s a pretty big range, and a lot can happen to your engine in that time. You may need to change your oil early if you experience any of the following symptoms in your car.

Change in your oil’s color: from red to black or brown

Motor oil has a coarse or gritty texture

Unfamiliar noises coming from the engine, such as squeaking or whining

New smells, especially anything that smells like oil, smoke, or burning

Changes in your vehicle’s overall performance

How to change your oil and oil filter

Congratulations! You are now an expert on your 2019 Jeep Grand Cherokee’s engine oil. Here’s how you can perform an oil change at home.

First, gather your car tools and supplies. Grab a socket wrench, a drain pan, and a filter wrench designed to remove the old oil filter. You’ll also need to buy a replacement filter and, of course, six or seven quarts of 0W-20 synthetic engine oil.

Once you have everything you need, run your car’s engine for a few minutes to get it up to operating temperature. In normal weather, this should only take a few minutes. Once you’re there, turn off the engine, pop the hood, and follow these steps to complete your oil change.

Remove the oil fill cap

Get under the engine and remove the oil drain bolt and washer, allowing the old oil to drain into your drain pan

Remove the old oil filter and continue to let the oil drain

Install the new filter

Replace the oil drain bolt using a new washer

Refill the engine with your new oil and replace the fill cap, using your dipstick to check if you’ve poured enough in

After changing your oil, it’s a good idea to turn on your car and let your engine run for about 30 seconds before you check the oil level. This will give you a more accurate measurement, and you’ll be able to top it off if necessary.

And there you have it! You’ve changed your oil. Once you’re done, run your engine for a bit and check for any leaks. If your

car's oil pressure light was on

, it should turn off on your dashboard within a few minutes.

Your last step is to clean up. Remember: do not dump your old oil on the ground or in a garbage bin. Seal it in a tight container and bring it to your local recycling center.

MORE:

Don’t forget regular insurance policy maintenance

Car maintenance can be expensive, but it’s not the most expensive part of owning a car. That honor goes to car insurance, which costs Americans an average of $1,771 per year for a policy with substantial coverage.

Don’t have the time to figure out whether your

Jeep Grand cherokee car insurance

policy is the best fit for your needs? Just download

Jerry

Jerry takes a few pieces of information about you and your car and gets to work finding the best deals for you from across dozens of top insurance providers.

You can switch policies right in the

trustworthy super app

, and Jerry will even notify you of new deals before each renewal period to make sure you’re never overpaying for the coverage you need.