The 2019 Honda CR-V 2.4L oil capacity is 4.7 qt or 4.4 L. Honda recommends changing your oil every 3,000 to 5,000 miles or every six months—whichever comes first.

Keeping up with oil changes is arguably the most important piece of

basic car maintenance

. Since you have to do it relatively frequently, knowing how to change your oil is a great way to save money. Some crucial information, though, is knowing your oil capacity and type.

Jerry

, the

car insurance

super app, has the answers you need. We will go over the 2019 Honda CR-V 2.4L oil capacity, type of oil needed, change interval, and steps to changing your oil. Then, we’ll throw in some tips for upgrading your

Honda CR-V 2.4L car insurance

policy.

Jerry sends free alerts to keep your car up-to-date so you can avoid costly repairs

* checking your rate won’t affect your credit score

Get ahead of my car maintenance

* checking your rate won’t affect your credit score

2019 Honda CR-V 2.4L engine oil capacity

Before we explain how to change your oil, we need to know how much you’ll need. The 2019 Honda CR-V 2.4L engine oil capacity is 4.7 qt or 4.4 L. However, other 2019 CR-V trim levels have a 1.5-liter engine rather than a 2.4-liter engine and require less oil (3.7 qt or 3.5 L).

Some other things to remember:

This is the oil capacity with an oil filter change, which is recommended with every oil change.

The oil capacity is distinct from the engine displacement. The notation of a 2.4-liter engine refers to the engine displacement or the total volume of the engine’s pistons, not how much oil you need.

MORE: How much should an oil change cost?

What kind of oil does a 2019 Honda CR-V 2.4L need?

Now that you know your 2019 Honda CR-V 2.4L engine oil capacity, let’s get into the best type of oil for your engine. Honda recommends using a

Honda Genuine

0W-20 synthetic motor oil or equivalent for your CR-V.

If you are unfamiliar with oil notation, 0W-20 refers to the oil’s viscosity at various temperatures and tells you what “weight” of oil it will behave like at low and high temperatures. The “W'' stands for winter, and the preceding number will tell you the viscosity at 0°F. The second number denotes the viscosity at normal operating temperatures of 212°F.

So, 0W-20 motor oil is a relatively low viscosity at low and high temperatures, meaning less wear and tear on your engine throughout the spectrum of use.

MORE:

Ultimate FRAM oil filter guide

How often to change the oil on a 2019 Honda CR-V 2.4L

Aside from knowing what type of oil and how much of it you’ll need, knowing when to change your oil is key.

If you’ve opted to use conventional oil instead of synthetic, you should aim to change your oil every 3,000 to 5,000 miles or every six months, whichever comes first. If you use fully synthetic oil, the change interval increases quite a bit. With synthetic oils, you should be looking to do an oil change every 8,000 to 10,000 miles.

If these ranges seem pretty broad, that’s because several factors can affect when you actually need to change your oil. The best practice is to check your oil every month and look for the following signs that it’s time for an oil change.

Dark brown or black oil–clean oil should be amber or light brown

Oil that feels coarse or gritty

Unusual noises coming from the engine

Smells of oil, burning, or smoke

Changes in vehicle performance

MORE:

How to test an oil pump

How to change your oil and oil filter

If you’ve opted to change your oil yourself, then it’s time to gather your essential car tools and supplies. You’ll need a socket wrench, a drain pan, a filter wrench, a new oil filter, and 4.7 qt of 0W-20 synthetic motor oil.

Once you’re ready, just follow these steps:

Run your engine for a few minutes until it warms up

Turn off the engine and pop the hood

Locate and remove the oil fill cap

Under the engine, locate and remove the oil drain bolt and washer

Let the old oil drain into the pan

Remove the old oil filter as the oil drains completely

Install the new filter

Replace the drain bolt with a new washer and tighten it to 29 lb-ft

Refill your engine with the new oil

Check the oil level, and if full, replace the oil fill cap

Run the engine for a few minutes and look for any leaks

After changing your oil, it’s a good idea to turn on your car and let your engine run for about 30 seconds before you check the oil level. This will give you a more accurate measurement, and you’ll be able to top it off if necessary.

Once you’re finished replacing your oil, make sure to dispose of the old oil responsibly. Pour it into a sealed container, and take it to your local recycling center.

Don’t forget regular insurance policy maintenance

Now that you know your 2019 Honda CR-V 2.4L oil capacity, type, and steps for changing the oil, perhaps it’s time to consider upgrading your

car insurance

. Experts recommend looking into policy updates every six months to ensure you get the best prices available.

With the

Jerry

app, insurance maintenance is now super quick and easy. A licensed broker, Jerry does all the hard work of finding cheap quotes from the top name-brand insurance companies and buying new car insurance. Jerry will even help you cancel your old policy.

And to ensure you always have the lowest rate, Jerry will send you new quotes every time your policy comes up for renewal, so you’re always getting the coverage you want at the best price. This level of service is why Jerry's

trustworthy super app

earned a 4.6/5 rating on the App Store and made it the top insurance app in the country.