The 2014 Ford Escape with a 1.6L engine is a solid and affordable crossover utility vehicle. Its comfy seating and agile handling make the Escape a joy to drive—just be sure you change its oil on a regular basis.

“Take care of a good car and it will take care of you.” That maxim has been passed down from parents to their children for generations now, and with good reason. Keeping up with regular maintenance will not only save you headaches, but it will also cost you much less money in the long run.

The 2014 Ford Escape is a fun, reliable crossover with excellent fuel efficiency. Treat your Escape right, and it will run for a long time. To that end,

Jerry

, the

car insurance

comparison app, has created a handy guide to both changing the oil and saving on

car insurance costs for a 2014 Ford Escape

Jerry sends free alerts to keep your car up-to-date so you can avoid costly repairs

* checking your rate won’t affect your credit score

Get ahead of my car maintenance

* checking your rate won’t affect your credit score

2014 Ford Escape 1.6L engine oil capacity

When we say that a 2014 Ford Escape has a 1.6-liter engine, we’re referring to its displacement, not its oil capacity. Don’t confuse the two!

Displacement is the volume of air swept by all of an engine’s pistons, excluding its combustion chambers. The larger an engine’s displacement, the more power it can generate. The 2014 Ford Escape actually came with the option of either a 1.6-liter or a 2.0-liter engine.

The 2014 Ford Escape 1.6-liter engine has an oil capacity of 4.3 quarts or 4.1 liters.

MORE:

How to test an oil pump

What kind of oil does a 2014 Ford Escape need?

Now that you understand the difference between displacement and oil capacity, let’s talk about the oil itself. When changing out your Escape’s oil, not just any old oil will do. The Escape’s owner’s manual recommends that you use

Motorcraft® SAE 5W-20 Synthetic Blend Motor Oil

That’s a pretty big name for a jug oil, but every part of it carries a very specific meaning, important to your engine’s performance. “5” means the oil has a low viscosity, or thickness, at 0°F. “W” stands for winter, indicating again that the oil performs well at low temperatures. “20” means that the oil stays thin and performs well even at extremely high temperatures up to 212°F.

Essentially, this oil performs well under both extremely cold and supremely hot conditions. It’s also a synthetic oil, meaning it’s a manmade lubricant composed of artificially produced chemical compounds.

MORE:

Ultimate FRAM oil filter guide

How often to change the oil on a 2014 Ford Escape

Now you know everything there is to know about the 2014 Ford Escape’s oil capacity. Are you ready to

change your oil

That depends. Ford recommends that you change your oil every 3,000 to 5,000 miles. If you put a lot of miles on your Escape, you may want to change your oil every six months.

Don’t just monitor your odometer and your calendar. Make sure you also check your oil level on a regular basis. You may also need to change your oil if you observe any of the following:

Your engine is making unusual noises

You smell burning, oil, or smoke

You notice a change in your vehicle’s performance

MORE:

Car loans for Fords

How to change your oil and oil filter

To change your oil, you will need the following materials:

5 quarts of replacement oil

ramps or a jack

T30 screwdriver or screwdriver bit set

replacement filter

drain pan

socket wrench

filter wrench

First, run the engine until it reaches its normal operating temperature. This shouldn’t take any longer than five minutes. Once your engine reaches its normal operating temperature, turn it off, open the hood, and follow these easy steps:

Raise the front with ramps or a jack

Remove the under-engine trim panel

Position the drain pan under the drain plug

Remove the drain plug and drain oil into the drain pan

Re-install the drain plug when the oil finishes draining

Remove and replace the oil filter

Refill with fresh oil and inspect the engine for leaks

Replace all removed components

After changing your oil, it’s a good idea to turn on your car and let your engine run for about 30 seconds before you check the oil level. This will give you a more accurate measurement, and you’ll be able to top it off if necessary.

Check that you’ve added enough oil to your engine by using your dipstick. Turn on your Escape for a few minutes and perform a final inspection for leaks.

Last but not least, clean up all your tools and materials. Make sure you place your used oil in a sealed container. You can dispose of it local recycling center.

How to save on insurance for your 2014 Ford Escape

Changing your oil regularly at home will keep your 2014 Ford escape running for years to come. It can also save you time and money. Do you know what else saves you time and money? Shopping for a new car insurance policy with Jerry!

Jerry

is a

car insurance

expert and

trusted comparison tool

. Designed for maximum efficiency, Jerry brings car insurance shopping into the digital age. Download the Jerry app, answer some simple questions, and pick your policy from a selection of personalized quotes. The whole process takes just a couple of minutes and is as easy as sending a text!

As great as the convenience is, the savings are even better. Drivers who shop with Jerry save an average of over $800 per year on their car insurance policies.

“I’m young and just got my first car, so choosing an insurance company for the first time was scary. My friend recommended this app to me and
Jerry
made everything simple! I put in my info and got something more affordable than what I expected for my age!” —Leslie T.