The engine oil capacity of a 2010 Toyota Camry is 4.7 quarts in a 2.5-liter four-cylinder engine and 6.4 quarts in a 3.5-liter V6. You’ll need to ensure that you’re using the fully synthetic 0W-20 or 5W-30 oil that Toyota recommends.

You’ll see plenty of 2010 Toyota Camrys still on the road today because they are just that dang reliable! But only under the condition that their owners understand engine oil capacity and how to perform regular maintenance.

Luckily, the experts at

Jerry

—the

insurance comparison app

that saves you time and money on your

Toyota insurance costs

—have created this all-inclusive guide to engine oil capacity for your 2010 Camry so it can live up to its dependable reputation.

Are you overpaying for your car insurance?

Compare quotes and find out in 45 seconds

Compare Rates Now

No spam or unwanted phone calls · No long forms

No spam or unwanted phone calls · No long forms · No fees

4.717k Ratings

5M+Drivers Joined

7M+Cars Garaged

2010 Toyota Camry engine oil capacity

The engine oil capacity for the 2010 Toyota Camry is determined by the type of engine you have. Here are the engine sizes available in this model and their oil capacity:

Oil capacity for 2.7-liter four-cylinder engine: 4.7 quarts (4.4 liters)

Oil capacity for 3.5-liter V6 engine: 6.4 quarts (6.1 liters)

Oil is the essential lubrication your vehicle needs for the engine's moving parts to function correctly. If you let your oil drop below the recommended capacity, fuel efficiency can decrease, and your engine could be at risk of mechanical failure.

What kind of oil does a 2010 Toyota Camry need?

Now that you know how much oil the 2010 Toyota Camry needs, it’s time to pick which oil you choose to feed your sedan. Head into the auto parts store with confidence using the owner’s manual recommendation:

Toyota Genuine SAE 0W-20 Full-Synthetic motor oil

for the four-cylinder or

Toyota SAE 5W-30

for the V6. Both engines recommend a grade of ILSAC multigrade.

So what’s the why behind the which? Well, 0W-20 is the oil with the lowest viscosity rating, which means it runs thin at all temperatures. This is an important feature for older cars because thinner oils (low viscosity) tend to cause less wear and tear on your engine. So these oils are specifically designed to help your Camry live up to its reliable reputation, as we alluded to earlier.

MORE:

Ultimate FRAM oil filter guide

How often to change oil on a 2010 Toyota Camry

Toyota recommends an

oil change

every 3,000 to 5,000 miles if you’re using conventional oil. If you work remotely or are more of a homebody, you can use every six months as an alternate benchmark to make sure your oil stays clean and functional.

Toyota does recommend using synthetic oil, which can last upwards of 10,000 miles. But with older vehicles, it’s important not to push the limits too far. It’s better to be safe than sorry.

Regardless of where you are on your

oil change schedule

, you don’t want to ignore any warning signs that your vehicle gives you. If you notice anything out of the ordinary, like strange smells, smoke, odd noises, or performance deviations, you may want to investigate whether or not dirty oil is to blame.

And even when there isn’t an overt cause for concern, you should still check your oil every month to stay ahead of the curve.

MORE:

How to change your oil and oil filter

Labor costs at the mechanic are on the rise with no signs of slowing down. Fortunately, changing your own oil doesn't require a technical degree. So save yourself some money and follow these easy step-by-step instructions:

Gather materials: A socket wrench, drain pan, filter wrench, replacement filter, and Toyota’s recommended oil.

Prepare the car: Turn on the engine and let it run until it reaches operating temperature. Then, turn off the engine and open the hood.

Changing the oil: Use these instructions.

Remove the oil fill cap.

You’ll want to remove the oil drain bolt and washer from underneath the engine, which will drain the old oil into a pan below.

Remove the old oil filter and let the oil drain until the drip stops.

Install the new oil filter.

Replace the oil drain bolt using a new washer and tighten it to 29 lb-ft.

Refill the engine with your oil of choice and replace the fill cap.

Testing and disposal: Use these instructions to finish the job!

Run the vehicle’s engine for a minute or two. This will not only let you check for leaks but will also give the oil time to settle into the filter so the oil level is as accurate as possible.

Use your dipstick to ensure you’ve added enough oil to the engine.

Dispose of old oil at a local recycling center.

Congrats—you’ve now developed a reusable skill that will save you anywhere from $25 to $75 per oil change!

MORE:

How to teach basic car maintenance to your teen

Don’t forget regular insurance policy maintenance

As we’ve covered, changing your own oil is a great way to lower costs as a car owner. But another way (that involves much less grease) is

shopping for car insurance

every renewal period.

And with the help of the

Jerry

app, you can easily browse quotes sourced from over 55 top insurance providers in seconds, quickly identifying whether or not you’re paying the lowest price for your Toyota Camry.

And if you do find a policy that is easier on your wallet, Jerry’s team of friendly agents will take care of all the phone calls and paperwork involved with switching over. So all you have to do is sit back, relax, and enjoy the savings!