Planning to change your 2008 Ford Focus’s oil at home? When that’s the case, you’ll need to know your engine oil capacity as well as its required oil type.

Keeping up with regular car maintenance like oil changes is one of the most important things you can do to extend your vehicle’s lifespan. And if your 2008 Ford Focus is still going strong, why not keep that momentum going?

Here to save you time tracking down your Ford Focus oil specs is

Jerry

, the super app that saves drivers time and money on

car insurance

. Read on to learn your vehicle’s oil capacity, required oil type, and more tips on oil changes and saving on

Ford car insurance costs

Compare insurance quotes from 50+ carriers with Jerry in under 45 seconds (Title in payload)

Find Savings!

4.7/5 rating on the App Store | Trusted by 5+ million customers and 7 million cars

4.7/5 app rating | Trusted by 5M+ drivers

2008 Ford Focus engine oil capacity

First things first: having too much or too little engine oil can prevent it from circulating properly, which could result in engine damage. Knowing your engine’s oil capacity helps ensure you have the right amount on hand when it’s time for an oil change.

You’ll find in your owner’s manual that the 2008 Ford Focus has an engine oil capacity of 4.5 quarts or 4.3 liters.

What kind of oil does a 2008 Ford Focus need?

It’s important that you check your owner’s manual for the specifications you need to look for in engine oil—an incompatible oil type could end up causing serious damage to your engine.

One of the most important specifications? Your oil’s viscosity grade, which gives you information about its thickness in different temperatures.

The 2008 Ford Focus requires SAE 5W-20 engine oil. The “5” here refers to the motor oil’s viscosity at cold temperatures before startup, while the “20” refers to its viscosity under normal engine operating temperatures.

As a first choice, Ford recommends opting for Motorcraft premium synthetic blend motor oil that meets your vehicle’s necessary specifications.

MORE:

Ultimate FRAM oil filter guide

How often to change the oil on a 2008 Ford Focus

How often should you change your 2008 Ford Focus engine oil?

Well, it depends.

If you’re using conventional oil, it’s generally recommended that you change your oil every 3,000 to 5,000 miles. If you’re using synthetic engine oil, however, you may be able to travel as far as 7,500 to 10,000 miles before needing an oil change.

If you don’t drive very often, it’s still a good idea to change your oil at least every six months to ensure it stays clear of debris.

Since oil change frequency can vary so widely, it’s important to check your oil regularly. Doing so once a month is a common recommendation.

If your 2008 Ford Focus is past due for an oil change, you might notice some of the following signs:

Dark brown or black color (rather than light brown)

Coarse or grainy texture (indicating too much debris buildup)

Low engine oil levels

Low oil pressure warning light illuminates

Knocking or ticking sounds from the engine

Declining engine performance

Oil or burning smells coming from the engine

MORE:

The most common Ford problems

How to change your oil and oil filter

When it’s finally time for an oil change, the first thing you’ll need to do is collect all your necessary materials. Those will probably include:

A socket wrench

An oil filter wrench

Fresh 5W-20 engine oil

A new oil filter

A new washer to use with the oil drain bolt

A funnel

A drain pan

Gloves

Towel(s) for cleaning up

Jack stands (keeping best safety practices in mind if you use them)

When you have all the supplies you need, you can begin by running your engine for just a few minutes. This will heat the motor oil, helping it to drain more quickly.

Then, you can shut your engine off and proceed:

Remove the oil filler cap under the hood

Remove the oil drain bolt and washer under the engine

Allow the engine oil to flow into the drain pan

Remove the old oil filter and install the new one, following package instructions

Replace the oil drain bolt with a new washer

Add the required amount of fresh engine oil

Replace the oil filler cap

Once you’ve made it this far, it’s time to check your work:

Run your engine for about 30 seconds

Check the oil level and top off if necessary

Run the engine for a few minutes more

Verify your low oil pressure light isn’t on

Check around for any leaks

Finally, safely dispose of your used engine oil at the proper recycling location, and your work is done!

Remember regular insurance policy maintenance

Once you know what you’re doing, the process of an oil change can be pretty smooth—but the

car insurance

shopping process can be even smoother with the

Jerry

app.

In less than a minute, you could start comparing personalized car insurance quotes from 55+ top providers, all in one spot. That makes it easier than ever to ensure you don’t overpay for your

Ford car insurance costs

Once you find a policy option you like, Jerry can even help you make an effortless switch to your new provider.

Even better, the average driver who makes a switch with Jerry enjoys an average annual savings of more than $800!

“I felt like I was paying too much for my insurance policy, so I downloaded
Jerry
. I literally only typed in 3 pieces of info and Jerry found my current insurance. In a few minutes, they pulled up 2 Progressive policies that showed $900 in savings over 6 months!” —Maeve J.

Jerry sends free alerts to keep your car up-to-date so you can avoid costly repairs

* checking your rate won’t affect your credit score

Get ahead of my car maintenance

* checking your rate won’t affect your credit score

Estimate your repair costs for free with GarageGuard™

Simplify your car maintenance with Jerry.

Try GarageGuard™