2000 Jeep Cherokee Bolt Pattern
The 2000 Jeep Cherokee bolt pattern is 5x4.5, which you’ll need to upgrade your wheels. Find out what other specs you’ll need to know to make the swap here.
Written by Talullah Blanco
Reviewed by Melanie Reiff
The 2000 Jeep Cherokee bolt pattern is 5x4.5, indicating each wheel has five bolts that form a four-and-a-half-inch diameter circle.
One of the best parts about owning a Jeep is the ability to optimize it for whatever you need, including off-roading capabilities. That’s why most Jeep owners opt to swap out their factory wheels with an aftermarket set.
If you're looking to upgrade the wheels on your 2000 Jeep Cherokee, you’ve come to the right place. In this
car repair
guide, we’ll cover the 2000 Jeep Cherokee bolt pattern as well as the other specs you need to know to make the swap including factory wheel size, stud size, wheel offset, center bore measurement, and wheel tightening torque.Compare insurance quotes from 50+ carriers with Jerry in under 45 seconds (Title in payload)
4.7/5 rating on the App Store | Trusted by 5+ million customers and 7 million cars4.7/5 app rating | Trusted by 5M+ drivers2000 Jeep Cherokee bolt pattern
The 2000
Jeep Cherokee bolt pattern
is 5x4.5, meaning each wheel has five bolts arranged in a four-and-a-half-inch diameter circle. Bolt patterns are always expressed as: # of bolts x diameter of the circle they form
We’ve covered bolt patterns, but you’ll also need a few other specs to make the swap. It’s important to know your Cherokee’s factory wheel size, stud size, wheel offset, center bore measurement, and tightening torque specifications of course. You’ll find those specs here:
- Factory wheel size: 15 inches
- Stud size: M12 x 1.75 (12 mm stud thread and 1.75 mm thread spacing)
- Offset: 30 mm
- Center bore: 71.5 mm
- Wheel tightening torque: 115-150 Nm
MORE:
Easy car mods
How to measure your Jeep Cherokee bolt pattern
You should be able to upgrade your wheels with the specs we provided above, but it’s always a good idea to check your specific Cherokee’s bolt pattern yourself. Luckily, finding your bolt pattern is fairly straightforward and you likely have the tool you need in your home: a measuring tape or ruler!
To get the first spec in your bolt pattern, count the number of bolts on your wheel. Next you’ll find the diameter of the imaginary circle by measuring from the outer edge of the lug hole to the center of the opposite bolt—that’s the second spec in your bolt pattern. Since each Cherokee wheel has five bolts, you’ll wind up between two bolts when you complete this step, so just measure to the center of either bolt instead.
All that is left to do is pair the number of bolts with the diameter of the circle and you will have your bolt pattern! Remember, this bolt pattern measuring method can be used on any vehicle.
"Jerryis the best! I was able to get the same insurance from Progressive for only $198, which saves me almost $400 a month. Seriously.” —Miles G.
Jerry sends free alerts to keep your car up-to-date so you can avoid costly repairs
* checking your rate won’t affect your credit score
Get ahead of my car maintenance
* checking your rate won’t affect your credit score
FAQ
What is the bolt pattern on a 2000 Jeep Cherokee?
The 2000 Jeep Cherokee has a bolt pattern of 5x4.5, which means each wheel contains five bolts that form a four-and-a-half-inch diameter circle.
Estimate your repair costs for free with GarageGuard™
Simplify your car maintenance with Jerry.
4.7You might also be interested
